2.585.000₫
This is a smart home’s brain and integrated with Zigbee wireless network that allows customers to connect and manage electrical devices, store configuration settings of users and update status of devices.
TECHNICAL INFORMATION:
– Operating voltage: 100 – 20V ~ 50 – 60Hz
– No-load power consumption: <0.5W
– Operating temperature: 0 ° C – 50 ° C
– Operating humidity: 0 – 95%
– Network: Zigbee HA 3.0, Z-wave
– Dimensions (LxWxH): 95.6 x 48.9 x46 mm
– Weight: 66.5g
– Warranty: 24 months
Considered the brain of a smart home, the central control unit adopts Zigbee wireless network, 802.15.4 standard and uses shortwave radio signals. It operates in the security area of the system, which is absolutely safe for your home against bad actors.
It is the place specialized in receiving and transmitting information to switches to tell the device to perform the task users require. It is also used to store configuration information as well as settings of users, update the status of devices and automatically make devices operate based on the configuration the user installs.
Precise and delicate design with 2 basic colors: black – silver.
Without a central control, the system of switches that connect electrical appliances in the home will become a regular mechanical switch. But thanks to this device, you can control and set up the automatic mode for the electrical equipment system in your house on phones, tablets …
The smart home controller will receive signals from sensors or users sent to the server. After receiving the information, the central controller – HC transmits a signal to the switch attached to the device to perform the user’s request.
For example: When the motion detection sensor sends the signal that means “someone moves into the sensor area” to HC which then transmits the received signal to the switch connected to the device such as corridor lights, tube lights … and they will automatically turn on / off.
In addition, HC also allows users to create animations. For example: You can make up a scene by using a switch to turn on or off all devices in the house through just 1 touch on the phone or tablet. Hence, you have complete control of all electrical appliances at home. Similar to other scenes such as reception, dinner, returning from work … for household devices.
Using ZigBee – the outstanding technology in the world with good security features, which can support and connect indoor devices into a smart network. Moreover, ZigBee consumes very little energy, which minimizes costs compared to other technologies.
In particular, Lumi server has successfully integrated with server of Amazon – USA to create smart home control solution by voice. It allows users to completely control devices in the house with their own ́ ‘powerful voice”. When you say “Turn on / off Lumi go home”, all the devices in the house will be on / off, depending on the command.
Product code: LM-HC 1.5
Operating voltage | 100 – 240V AC ~ 50/60Hz |
Operating temperature | 0℃ – 50℃ |
Media | Zigbee |
Power play Zigbee | 10 dbm |
Dimensions (D x D x H) | 95.6 x 48.9 x 46 mm |
Weight | 66.5 gram |
Convention: Power (Led 1), Internet (Led 2), Service (Led 3), Zigbee (Led 4), Z-wave (Led 5).
Powered devices | When the Led power supply is 1 bright and always bright during operation, the led 2, 3, 4, 5 flashes 3 times. |
1-bright Led Start Process | |
Successful launch of 5 bright leds | |
Internet-connected devices | No Internet connection and server: Led 1, 2, 4, 5 am, led 3 strobe continuously. |
Successful connection: 5 leds are all bright. | |
Operation | When joining the Zigbee network: Led 4 flashes continuously. The rest of the leds are bright. |
Before performing an in-house smart device system installation, users need to check the firmware version of HC and update the firmware for HC if it is in a lower version than it is now.
Step 1 :
After the default power supply HC will broadcast wifi HCxxxx (xxxx – is the last 4 numbers of MAC HC), with the password is ABC123456. The user connects the phone or computer to HC’s wifi to perform the configuration.On a web browser, enter the default address 10.10.10.254 to enter the configuration section for the central controller.
The default password of the website is ABC123.
Step 2:
Successfully logging in, the user selects the Administration tab, in the Software information section select UPGRADE FIRMWARE, then select Chose the file to select the firmware file lumi provided saved in the machine. Finally select UPGRADE / RESTART to perform the firmware update process for HC.
Note:
The firmware upgrade process time is about 3 minutes, during this process, users absolutely must not lose HC power and ensure a stable power supply.
LM-HC has 2 internet connection modes: AP mode (wired LAN connection mode). Station mode (wifi connection mode).
AP mode:
Station mode:
Users can reset the HC central controller to the default in 2 ways. Device actions:
Press and hold the config button located next to the memory card slot on the HC for about 5s, observe the LED indicator light up to LED 4, then release. Then led 2, 3, 4, 5 flashed 3 times, HC restarted. After a successful reboot, HC lights up 5 LEDs and generates wifi.
Operation on the web configuration:
If the user connects to wifi HC, access address 10.10.10.254 in the browser to the HC configuration section, the web password is ABC123, select the Administration tab, and at Factory reset, select RESET.
The product packaging box includes: 1 HC set, 1 set of manual, 1 1m long network cable.
Reviews
There are no reviews yet.