Luto Flat Glass Aluminum Frame Touch Switch

1.760.000₫ – 2.365.000₫

Scratch-resistant tempered glass
Diamond-cut or rounded aluminum frame
Remote control via the internet/LAN network in the house (through the Lumi Life+ app)
Control by Rule, Scene, Schedule (Customized according to user needs).
Can control devices by voice through integration with Google Assistant, Alexa, Apple Siri
Safe, fireproof
Communication: Zigbee/BLE Mesh
Faceplate color: White/Black
Dimensions: Rectangle: 123 x 78 x 32.5 mm / Square: 95 x 95 x 32.5 mm
All are high-power switches
Warranty: 24 months

Buy now Information is passed to the agent nearest you

Overview

Luto Smart Touch Switch is the new version of the smart touch switch in the Lumi smart home ecosystem. Acting as a communication device, the Luto flat glass touch switch helps users control home appliances via smartphones and voice. Not only scored in smart features, the Luto Flat Glass Aluminum Frame Touch Switch is also attractive with a flat tempered glass in 2 classic black or white colors, and a sharp aluminum frame with diamond-cut lines, bringing sophistication, luxury and elegance when installed on the wall.

Features

Using the Luto smart switch to replace normal mechanical switches, users can experience a smarter life which allows most device control commands in the home to be done via smartphone or voice.
The smart switch connects to your phone via the central controller and uses Zigbee/BLE Mesh wireless connection to process and send commands.
Turn on/off devices with just a light touch on the switch
Control the entire lighting system in the house through smartphone and voice
Schedule, set timers to control devices such as water heaters, curtains …
Set up rules, scenes, and schedules for smart gadgets in the house to function simultaneously, as well as input and output signals to create smart living scenarios like eating, going home, and so on..

In general, as long as the device is controlled by a mechanical switch, it can be totally transformed into a smart device that can be operated via a smartphone and voice using the smart touch switch.

Lumi has successfully connected to virtual assistants like Google Assistant and Alexa. This allows you to experience the power of the voice. For example, if you say the command “OK GOOGLE, I’M HOME; Hey SIRI, I’M HOME,” all devices in the house will be totally switched on or off, depending on the command.

Advantages of Luto Flat Glass Aluminum Frame Touch Switch

Modern, sophisticated, elegant design

The Luto smart switch uses a tempered glass faceplate that is scratch-resistant and impact-resistant. It is combined with a LED ring around it, with the Lumi logo in the right corner, creating a highlight for the brand and a charming look for the product.
The LED light is always bright whether the switch is on or off, so you can see the smart touch switch even in the dark.

High durability

The Luto switch has a one-piece design with 1.2-2mm thick plastic to increase hardness and durability.
The solid aluminum frame uses anodizing technology to prevent oxidation and reduce the impact of bending during installation.
The solid aluminum frame has undergone complex processing to achieve a glossy and elegant finish.
PET protects the switch from paint and dust before the project is completed.

Good moisture resistance

The Luto switch ensure good water/moisture resistance during operation thanks to the addition of 4 rubber gasket positions:

Rubber gasket on the connector
Rubber gasket on the config button
Powershell gasket
Rubber cover for screw holes

Safe and high sensitivity

The switch uses capacitive touch technology and isolated power, ensuring safety when using.
The design of the blue LED light (when turning off) and red light (when turning on) around the button makes it easy to find in the dark and protect eyesight.
Users can control it using Smartphone/Tablet via the Internet or by voice. In particular, the switch integrates overvoltage and overload protection; ensuring absolute safety for users during use.

igh compatibility and customization

The Luto smart switch has high compatibility with various types of recessed boxes on the market.
All Luto switches are high-power switches and are easily compatible between Smart Lighting and Smart Home.
Luto is also easy to customize to suit each family by setting the LED schedule on the smartphone, changing the brightness of the LED.

How Luto Flat Glass Aluminum Frame Touch Switch works

The Luto flat glass touch switch works by the control of the central controller (Home Controller).

The operation of the device will be demonstrated by the following example:

When the user issues the command “turn off the light” by touching the light button on the phone app, the command will be sent to the central controller via Zigbee/BLE Mesh.
From there, the HC controls the touch switch to turn on/off the light device as requested by the homeowner.

Video introducing the Lumi Smart Home solution

The following video describes the Lumi Smart Home solution:

The Luto Flat Glass Touch Switch with aluminum frame is more than simply a device for turning on and off devices; it’s a work of art that expresses sophistication and elegance. With the ability to integrate smart technology, you can connect the smart touch switch to a smart home system and control it remotely using your smartphone. Contact Lumi right now to design your home with elegance and modernity using models of switches such as flat glass switches, Luto smart switches to control single curtains, double curtains, and more.

Technique

1. Overall

Product Code: LM-Sxx/S-CB/CC or LM-Sxx/S-CB/CG

The LM-Sxx/S-CB/CC or LM-Sxx/S-CB/CG is a Lumi touch switch that supports turning on/off 1 to 4 output channels.

2. Technical Specifications

Operating Voltage	100 – 240V AC ~ 50/60Hz
Operating Temperature	0℃ – 50℃
Communication	Zigbee
Zigbee Transmit Power	10 dbm
No-load Power Consumption	< 0.5W
Load Capacity	No-Load: 3000W/channel
	LED Load: 300W/channel
	Total Load Capacity: < 4000W
Dimensions (D x R x C)	Rectangle: 123 x 78 x 32.5 mm
Dimensions (D x R x C)	Square: 95 x 95 x 32.5 mm
Overload Protection	Yes
Overvoltage Protection	Overvoltage protection at 275V, automatic cut-off
Diffuser	Even light diffusion
Version	All buttons are CSC for versions 1, 2, 3, and 4 buttons
Compatibility	Compatible with Simon single and double recessed boxes
Moisture Resistance	High

3. Installation

Step 1: Wire the device.

Wiring diagram:

L: Connect the live wire of the power supply.
N: Connect the neutral wire of the power supply.
1,2,3,4: Connect the live wire of the loads.

Step 2: Install the switch in the recessed box.

Remove the switch glass: Use a screwdriver to insert into the small groove on the switch bezel and gently push to remove the glass.
Install the switch in the recessed box and reinstall the glass.

Note:

Compress the electrical wires in the recessed box to fit the switch and avoid screwing into the wires.
Do not screw too tightly, as this will bend the switch, warp the switch’s touch circuit, and prevent the switch from being turned on or off manually.

4. User guide

4.1. Turning on/off

To turn the switch on or off, simply tap the touch-sensitive surface once.

When the switch is on, the LED ring lights up red.
When the switch is off, the LED ring lights up blue.

4.2. Changing between toggle and momentary mode

Toggle mode:

In toggle mode, tapping the touch ring once will turn the switch on or off. The switch will remain in the new state until it is tapped again.

Momentary mode:

In momentary mode, tapping the touch ring will turn the switch on for a short period of time (500ms) before it automatically turns off.

To change between toggle and momentary mode:

Press and hold the config button for 3 seconds until the LED on button 1 flashes red twice.
Observe the status LED on the buttons: The LED will be off in momentary mode. The LED will be red in toggle mode.
Tap the button you want to change the mode.
Press the config button once or wait 10 seconds to exit the settings and save the mode.

4.3. Touch lock

Since 6/2019, the smart switch has a touch lock function, users will not be able to turn on/off manually and can only be controlled by the Lumi Life app. There are two types of touch locks: locking individual buttons or locking all buttons.

Press the config button 10 times in a row to lock and unlock the touch sensor.

To lock: All LEDs will flash red 5 times.
To unlock: All LEDs will flash blue 5 times.

To lock an individual button, press and hold the config button for 9 seconds until the LED on button 1 flashes red 3 times. Then, release the button and observe the LED status on each button.

To lock: LED turns off.
To unlock: LED turns pink.

Tap the button to change the lock/unlock status. After setting, quickly press the config button once or wait 10 seconds to automatically exit the setting mode.

4.4. Changing the brightness of the indicator LED

The indicator light on the switch has two levels, bright or dim. For switches manufactured before 6/2019, users push and hold the config button for 8 seconds, seeing the indicator light change brightness before releasing.
For switches manufactured after 6/2019, users must press and hold the config button for 5 seconds while the indicator light changes brightness before releasing.

4.5. Device Grouping

From February 24, 2020, the switch has added a device grouping feature without the need for software configuration.

Creating a Group

Select a button to role as the master button. Process the following steps on this button first.
Press and hold the touch button for 10 seconds until the LED blinks red twice, then release.
Press the button again once to confirm. The LED will light up red..
Repeat steps 2 and 3 for each button you want to add to the group.

Deleting a Group

Press and hold the button you want to delete for 10 seconds until it blinks red twice.
Press the button again once, then exit the configuration mode.
To delete the entire group, delete the master button.

Exiting Configuration Mode

After configuring, press the config button twice to exit.
Alternatively, the switch will automatically exit the configuration mode after 1 minute.

Notes:

To use this function, the switches must be connected to the network and be on the same network (belonging to the same HC or LC).
A group can have a maximum of 5 switch buttons, and 2 buttons from the same switch cannot be grouped together.

5. Setup devices

5.1. Joining the network

To set up the switch control via the app on the phone, users need a central controller (HC) and have created a home on the system.
Users log in to the Lumi Life+ app > select Settings > select Device Settings > select HC > Zigbee > Join Network.
The indicator light on the switch flashes red four times in a row with a cycle of 1s/1 time when joining the network successfully.
If the switch does not join the network, the switch may have been configured, and the user can reset the device to return to the network joining mode.

5.2. Controlling devices on the Lumi Life+ app

After connecting the switch to the network, the user names the device and places it in a room to operate it using the Lumi Life+ app on the phone.

Similar to manual on/off, users tap the device icon to control it on/off.

Bright icon: The switch is on
Dark icon: The switch is off

In addition, users can configure the device with complex functions such as rule, scene, and schedule setup.

6. Device reset

6.1. Reset Zigbee 3.0 switch

From February 24, 2020, to reset and remove the device from the network, users press the config button five times in a row.

If the device is in the network, after the reset, the indicator light of the device will flash red twice in a row to indicate that the network has been deleted successfully. Then, it will flash red twice in a row again to indicate that it has been restarted and flash red three times in a row to return to the automatic search mode.

6.2. Reset Zigbee 1.2 switch

Before February 24, 2020, to reset and remove the device from the network, users press and hold the touch button for 5 seconds, when the indicator light flashes red, then release the hand.

Reset successfully, the indicator light flashes red three times in a row and the device returns to the automatic search process.

Note: Hold down any button and observe that all 4 indicator lights turn pink before releasing the button.

7. Packaged product set

The curtain smart switch set is packaged in a box including: 1 Luto smart switch set, 2 screws, 1 user manual.

Same solution

Smart Lighting System

Smart 16 Million-Color RGB Lightstrip

1.023.000₫

Length: 5m
Operating voltage: 24V DC
Capacity 18W / m
Number of possible colors: 16 million colors
Communication: BLE Mesh
Lifespan: 25,000 hours

Border
Shape
Màu viền
Color
Button	Clear

Border
Shape
Màu viền
Color
Button	Clear