- Operating voltage: 100-240V ~ 50-60Hz
- No-load power consumption: <0.5W
- Operating temperature: 0 C - 50 C
- Load capacity: Incandescent lamp: 500W and Led: 150W
- Network: Zigbee /No Zigbee
- Measurements: Rectangular version: 80 x 121,5 x 31,5 mm and Square version: 95 x 95 x 31,5 mm
The stair light switch integrated with sensor is an intelligent indoor device for automatic lighting based on human presence and light intensity. With the design using capacitive touch technology and scratch-resistant tempered glass, the device will make your home look more stylish and modern than ever.
When integrated into a smart home system, the product will connect to other devices via a central control unit. It uses capacitive touch technology to turn on / off electrical equipment when you touch icons on the glass surface. Red icon means the light is on and blue one means it is off.
In particular, there are 2 operating modes: Press and hold on the auto 1 second (LED blinks twice) to switch between modes.
: Led auto lights green
This is the automatic operating mode of the product with lights being on and off lights based on sensor. When movement is detected, light is on, LED light auto flashes green for 2s, when the motion stops after a set period of time, light turns off.
: Led auto off
Operation mode does not rely on sensors. Control light on and off with a round button
Lumi's built-in staircase switch device has 2 motion detection scanning angles, so you need to be careful to install the product properly.
Looking at the image below, you'll see:
+ Motion detection angle 1: 150 degrees.
+ Motion detection angle 2: 35 degrees.
With a hope to increase the convenience, the product also has been designed to have a sensor eye attached. The accompanied device narrows the range of motion detection angle 1 to 75 degrees while the motion detection’s second angle remains the same.
- Sensors along stairs turn on and off when moving.
- Motion sensor mounted indoors, serving for automatic lighting based on human presence and intensity of environmental light.
- Replaceable eye cover
- 100% identification border and 50% identification border
MODE OF OPERATION
The 2in1 stair sensor has an eye sensor that detects movement in order to activate the light. Thanks to this feature, the sensor only turns on the light when people are moving in the scanning area and turn off if no one is in its sight.
If in your house, at some special positions, stairs need to have both switches and motion sensors, Lumi can integrate 2 devices in 1 to help you optimize costs and space. Stair switch product integrated with sensors has both a switch function and a light sensor function. Besides, this product is modernly and compactly designed and suitable for all houses, with rectangular or square shapes for customers' preferences so that it can be also considered as a decoration to help your home become more beautiful and luxurious.
Stair switch products are installed simply and quickly, being mounted on plaster ceiling or common ceiling. The way to install the stair switch integrated with sensor is as simple as installing the normal switch in the wall. It is designed with the same technical standards of size similar to traditional switches, so it does not require to change wall infrasture for installation
Please contact us at hotline 0904.665.965 to become the owner of smart technology and fully enjoy the comfortable and modern life of Lumi Vietnam smart home solution.